Turning Off Two Factor Authentication On Apple iPhone SE (2020)? 5 Tips You Must Know

Apple has produced one of the most consumed, acknowledged, and preferred smartphones that allowed them to rule the industry for a considerably long period of time. Their style and presentation were not the only reason that made people look forward to buying an iPhone. Apple created its own operating system and presented their own versions of security and protection. One of the most recognized and impeccable features offered by Apple in its innovative structure was the security and safety through Apple ID and Apple Account. Every important feature that operated throughout the Apple iPhone SE (2020) or iPad was focused over a single entity, the Apple ID. However, apart from the Apple ID, there were several other layers of authentications and verifications that were added throughout the protocol structure. A couple of them are renowned as Two Factor Verification and Two Factor Authentication. This article produces a very generous set of advice that should be looked over while handing these layers of protection. To get a better understanding of the procedures involved, you need to look over the guide to gain better knowledge on how to turn off Two Factor Authentication on your Apple.

Part 1. Is two-step verification the same as two-factor authentication?

There might be a few differences involved in these two security models; however, it should be kept in mind that they focus their purpose on securing the Apple ID of the user. Two Factor Verification is a security protocol that protects access to the various activities performed through the Apple ID. It attenuates an extra verification step across the Apple iPhone SE (2020) device in addition to the password for the Apple ID. The device receives a verification code from an authentication factor that allows the authorities to confirm the credibility of the user.

The Two Factor Authentication is considered as an upgrade to the Two Factor Verification, which was released two years after the Two Factor Verification, in 2015. This authentication method exempted the offline recovery keys and application-specific passcodes. They added a six-digit authentication code onto the original password and produced an offline, time-dependent code that is to be generated through the Settings of the trusted device of the user. This feature was appended into the iOS 9 and OS X El Capitan with a region-specific target.

Click here

## Part 2. How to turn off two-step verification?

As you are aware of the Two-Step Verification process, it is quite easy and typical in configuring. However, when it comes to turning the settings off, it is also a simple and straightforward procedure that can be easily covered by following the steps provided below.

Step 1: You are required to open the Apple ID Account web page on your browser and sign in with your Apple ID credentials.

Step 2: As you log into the website, access the “Security” section, and tap “Edit” from the options provided on the list.

Step 3: Tap on the “Two-Step Verification” option and turn it off. Confirm to conclude the process. You may be required to select the new security questions and verify the data of birth in the process. As you would be done with it, an email would be received across your connected address for confirmation.

Part 3. How to turn off two-factor authentication? (lower than iOS 10.3)

Two Factor Authentication cannot be turned off in a few cases and accounts for iOS versions greater than 10.3. However, if you have activated Two Factor Authentication across the iOS versions lower than 10.3, you can deactivate the feature through a series of simple steps. The exemption of this security feature across your device leaves it protected only through a password and a few security questions. For turning off the Two Factor Authentication from your Apple device, you need to follow the steps provided as follows:

Step 1: Open your browser and access your Apple ID Account website. Provide the details of your Apple ID and log in.

Step 2: Tap on “Edit” in the “Security” section and turn off the “Two Factor Authentication” option.

Step 3: This would lead you to set new security questions for the Apple ID account, followed by a verification of your date of birth. The successful execution of the process would lead to turning it off.

Part 4. Why can’t you turn off two-factor authentication if you already use it? (iOS 10.3 and later)

For users who have an Apple device with an iOS 10.3 or later version, they cannot turn the Two Factor Authentication off after it is accessed. The latest iOS and macOS included extra layers of security in their features, which led towards a better security foundation and protection of information. Users who have updated their account information can unenroll in two weeks after updating. For this, you are required to simply access the confirmation email that you have received and tap on the link to approach the previous security settings. Thus, it makes it far more than impossible for users to turn their Two Factor Authentication off if they consider it unnecessary for their device. This feature is something that would always remain intact with their device as an extra layer of security. Its absence does leave a chance of illegal access to the Apple iPhone SE (2020) device and an increased risk of a security breach. Since it is directly built across the Apple iPhone SE (2020) device and its settings, this makes it a very hard-to-approach characteristic.

Part 5. How to turn off two-factor authentication by removing Apple ID

Users who are very reluctant to remove the two-factor authentication off their device can consider removing the Apple ID itself for fulfilling the purpose. However, when it comes to executing such tasks, the need for a third-party platform gets evident. Third-party platforms provided dedicated services in providing users with a unique platform of operation with an environment that suits their purpose perfectly. Many platforms provide such impressive services, yet the selection gets quite difficult for a series of reasons. The following pointers explain the reasons to the users over why they should focus on selecting a platform such as Dr. Fone – Screen Unlock (iOS) for this purpose.

• You need to have no excessive knowledge of handling the platform.
• You can cover all the dynamics of unlocking the Apple iPhone SE (2020) device without the use of iTunes.
• The platform provides you with the ability to unlock the passcode of your Apple device with ease.
• It offers you to protect your device from the disabled state.
• Works across all models of iPhone, iPad, and iPod Touch.
• Provides services to the latest version of iOS.

Dr. Fone – Screen Unlock (iOS) makes it easy for the users to control and remove their Apple ID and disable the two-factor authentication across their device. However, when it comes to controlling the platform, it follows a few simple and efficient steps that would guide you in executing the task successfully.

Step 1: Connect your Device and Launch Application

You need to connect your Apple device with the desktop and launch Dr. Fone across the computer. Tap on the “Screen Unlock” tool present on the home window and proceed with the removal of two-factor authentication.

Step 2: Access Appropriate Option

On the next screen that opens, you are required to select “Unlock Apple ID” from the three options. Proceed to your Apple device to take the process further.

Step 3: Trust the Computer

Open the Apple iPhone SE (2020) device and tap on “Trust” over the prompt that appears on the screen. Following this, you need to navigate to the Settings of your device to initiate a reboot.

Step 4: Execution of Process

Once you are done with initiating a reboot, the platform automatically detects the update in the process and initiates removing the Apple ID from the Apple iPhone SE (2020) device. Once the platform is done with the process, it provides a prompt message in the next window displaying the execution of the removal of Apple ID from your device. This also removes the Two Factor Authentication off your device.

Conclusion

The article has presented a very detailed comparison of the Two Factor Verification and Two Factor Authentication and provided an elaborated discussion over how to turn these security features off their devices. The article also discussed a third-party platform that would guide in removing such security features of the Apple iPhone SE (2020) devices over the requirement of the user. You need to go through this article to get a better knowledge of the execution of the mechanism.

How To Erase an Apple iPhone SE (2020) Without Apple ID Password?

Have you ever wondered what happens when you erase the content of your Apple iPhone SE (2020) storage? Erasing an iPhone means restoring it to its factory settings to install the latest iOS version. It also permanently removes all your data, including photos, videos, contacts, apps, and other information stored on the Apple iPhone SE (2020) device.

This process is often necessary when you sell or give away your Apple iPhone SE (2020) to ensure your personal information remains secure. But, you may encounter a situation where you should learn how to erase an iPhone without an Apple ID. While this may seem challenging, you can use a few methods to achieve this goal. This article will show you how to do it with or without an Apple ID password.

Part 1: A Checklist on What To Do Before Erasing an iPhone

If you’re looking at how to erase an iPhone without an Apple ID or account password, you’ve come to the right place. Before you begin, preparing your device and ensuring you have all the necessary information is crucial. Here’s a checklist of what to do before erasing your Apple iPhone SE (2020):

Backup Your Apple iPhone SE (2020)

You can back up to iCloud or use Finder on macOS 10.15 or later. Remember that iCloud backups are stored on Apple’s servers and always encrypts backups. On the other hand, computer backups are stored on your computer’s hard drive and require a connection to the backup computer. Consider what your needs and preferences are when choosing between these two backup options.

Prepare Your Apple iPhone SE (2020) Passcode

You’ll need your Apple iPhone SE (2020) passcode to erase an iPhone. If you’ve forgotten your passcode, reset it using recovery mode.

Ready Your Apple ID Password

You may be asked to provide your Apple ID password to disable the Find My iPhone function and remove the Apple iPhone SE (2020) device from your account. Have it handy to avoid any delays. It’s necessary for security verification during the erasure process.

Unpair Apple Watch

If you own an Apple Watch, unpair it from your Apple iPhone SE (2020). It ensures a smooth disconnection and prevents complications when erasing the Apple iPhone SE (2020) device.

Cancel Your AppleCare Plan

If you have an active AppleCare plan for your Apple iPhone SE (2020), cancel it on your Apple iPhone SE (2020) before erasing the Apple iPhone SE (2020) device. You can cancel your AppleCare plan by phone by calling AppleCare customer support. It will prevent any unnecessary charges after the erasing process.

Sign Out of iCloud

If your Apple iPhone SE (2020) has iOS 10.3 or later, open the Settings app, then tap on your name at the top. Next, scroll down, tap Sign Out, enter your Apple ID password, and tap Turn Off.

Remove Your Apple iPhone SE (2020) From Your List of Trusted Devices

Remove your old device from your list of trusted devices in your Apple ID settings for added security. This measure strengthens the defense against unauthorized access to your data.

Part 2: How To Erase iPhone Without Apple ID Password via Settings?

Erasing an iPhone and restoring it to factory settings is a straightforward process you can do in a few steps. Whether you’re preparing to sell or gift your device or troubleshooting persistent software issues, erasing your Apple iPhone SE (2020) contents can enhance its performance. The process is easy if you have your Apple ID password readily available.

However, if you’ve forgotten your Apple ID password, don’t fret. Follow the guide below to reset your Apple ID password and erase all content and settings on your Apple iPhone SE (2020):

• Step 1: Open the Settings application, then tap [name].
• Step 2: Go to Sign-In & Security > Change Password.

• Step 3: Follow the on-screen instructions to reset your Apple ID password.
• Step 4: Go to General > Reset from the Settings app, then tap Erase All Content and Settings.

• Step 5: Input your Apple ID password or your passcode when prompted.
• Step 6: Click Continue to confirm. Then, wait while the contents are being removed from your Apple iPhone SE (2020) device.

Part 3: How To Erase iPhone Without Apple ID Password on Computer?

Activation lock is a security feature. It prevents anyone from activating an iPhone without your Apple ID password. If you try to factory reset your Apple iPhone SE (2020) without turning off Find My iPhone, the activation lock will be in place. It means you need to enter your Apple ID password to activate the Apple iPhone SE (2020) again. To turn it off, also ensure to turn off Find My on your device.

Go to Settings > [your name] > Find My or Find My iPhone to check.

If you want to erase an iPhone without Apple ID password on your computer, you can do so as long as you turn off the Find My. However, you’ll need to put your Apple iPhone SE (2020) into Recovery Mode first.

• Step 1: Turn off your Apple iPhone SE (2020), then put it into Recovery Mode.
• For iPhone 8 or later: Press and hold the Side button.
• For iPhone 7 or iPhone 7 Plus: Press and hold the Volume Down button.
• For iPhone 6s or earlier: Press and hold the Home button.
• Step 2: Connect your Apple iPhone SE (2020) to the computer with the button held down.
• Step 3: Hold the buttons steadily until the Recovery Mode screen is visible.

• Step 4: Switch on your Apple iPhone SE (2020). Then, connect it to a Mac or Windows computer using a USB cable.

• Step 5: When prompted, follow the on-screen instructions to enter your device passcode or click Trust This Computer.

• Step 6: Depending on your computer, open Finder or iTunes. Then, do either of the following:

• For macOS 10.15 or later: Select your Apple iPhone SE (2020) under the Locationssection, then click Restore iPhone.

• For macOS 10.14 or earlier or Windows: Click the Apple iPhone SE (2020) in the top left window, click Summary, then click Restore iPhone.
• Step 7: Click Restore in the dialogue box. iTunes or Finder will download your Apple iPhone SE (2020)’s latest iOS software and restore the Apple iPhone SE (2020) to its factory settings.

• Step 8: Once the restore is complete, the Apple iPhone SE (2020) will restart.

Part 4: Erase an iPhone Without Apple ID via Activation Lock Support Request

You can request to unlock Activation Lock support from Apple if your device is not in Lost Mode or if you need to erase an iPhone without an Apple ID password. To do this, you need to provide proof of purchase of the iPhone. It can be in the form of a receipt, invoice, or credit card statement.

The proof should show the serial number of the iPhone, IMEI, or MEID. Once Apple unlocks the Activation Lock on your Apple iPhone SE (2020), your Apple iPhone SE (2020) contents will be permanently erased. Also, note that if you restore your Apple iPhone SE (2020) from a local backup, the Activation Lock will re-enable.

To start this request, follow these steps:

• Step 1: Head to Apple’s Activation Lock support page. (al-support.apple.com)
• Step 2: Scroll down the page, select the agreement checkbox, click Continue, and it will redirect you to a new page.

• Step 3: Enter your email address and other required information, then click Continue.

Part 5: How To Erase an iPhone Without an Apple ID Password in Minutes?

The time it takes to process an unlock Activation Lock support request can take days. If your device is erased as soon as possible, use the Wondershare Dr.Fone Screen Unlock tool. This third-party mobile solution can erase an iPhone without an Apple ID password, even if the Find My feature is enabled. Also, it can:

• Remove several iOS lock screens, such as passcode, Touch ID, and more.
• Remove the iCloud Activation Lock
• Bypass Apple ID from iPhone without a password
• Remove MDM restrictions

Dr.Fone Screen Unlock is a simple, easy-to-use tool compatible with the latest iOS models. Follow these steps to remove the Apple ID from your Apple iPhone SE (2020) and erase all its contents within minutes:

• Step 1: Download and install Dr.Fone on your desktop. Launch the app and connect your Apple iPhone SE (2020) using a USB cable.

• Step 2: From the Toolbox homepage, select Screen Unlock, then choose iOS.

• Step 3: Select Remove AppleID to delete iPhone contents, including the Apple ID.

• Step 4: The next screen shows the connected device. Click Unlock Now.

• Step 5: Click Yes to confirm you have set up a screen lock.

• Step 6: Click Yes to verify you have enabled two-factor authentication on your Apple iPhone SE (2020).

• Step 7: Follow the in-app instructions to put your device in Recovery Mode.

• Step 8: Select an option from the System Version drop-down list, then click Start.

• Step 9: Wait while the iOS firmware downloads.

• Step 10: Once downloaded, click Unlock Now to proceed.

• Step 11: Enter the code in the dialogue box and click Unlock.

• Step 12: Keep your Apple iPhone SE (2020) connected to your computer while the process progresses.

• Step 13: Click Done and check that your Apple iPhone SE (2020)’s data and Apple ID have been removed.

Conclusion

It can be challenging to erase an iPhone without an Apple ID password, but it’s achievable by following the right steps. Remember to weigh the security implications and back up your data beforehand.

If you’re seeking a straightforward method on “how to erase an iPhone without Apple ID,” Dr.Fone Screen Unlock tool is a good solution. With its user-friendly interface and efficient operation, Dr.Fone simplifies the process, making it accessible to users of all technical levels. Don’t let a forgotten Apple ID password hinder your device’s functionality. Try Dr.Fone Screen Unlock and reclaim control of your Apple iPhone SE (2020).

How to Delete iCloud Account On Apple iPhone SE (2020) without Password?

If you own various Apple products, you must be familiar with the significance of iCloud service. iCloud is a cloud storage service that allows Apple users to sync their data and access it across different Apple devices, be it iPhone, iPad, or Macbook.

Now, there are several situations where a user might want to delete their iCloud account, especially when one has created too many iCloud accounts and don’t remember the passwords to all of them.

So, in this guide, we’re going to share some insight into how to delete iCloud account without password so that you can get rid of all the unnecessary accounts and use a single one across all your iDevices.

Part 1: How to delete iCloud account without password on iPhone?

If you have an iPhone at the moment, here are three different ways to delete an iCloud account using your phone itself.

1.1 Remove iCloud from settings on iPhone

Follow these instructions to delete the iCloud account from the “Settings” menu on your Apple iPhone SE (2020).

Step 1: Open “Settings” and scroll down to click on “iCloud”.

Step 2: You’ll be asked to enter your password. Here enter any random number and click “Done”.

Step 3: iCloud will tell you the password is incorrect. Tap “Ok” and you’ll be prompted back to the iCloud screen.

Step 4: Now, click on “Account” and erase everything from “Description”. Click “Done” and you’ll again go back to the iCloud screen. This will disable the “Find My iPhone” feature and you’ll be able to remove the iCloud account easily.

Step 5: Again, tap on iCloud and scroll down till the end. Tap “Delete Account” and again click “Delete” to confirm your action.

That’s how to delete iCloud account without password directly from “Settings” on your Apple iPhone SE (2020).

1.2 Delete iCloud account via iTunes

Another convenient way to delete the iCloud account is to use iTunes on your Apple iPhone SE (2020). Let’s walk you through the process of deleting an iCloud account using iTunes.

Step 1: First of all, make sure to disable the “Find My iPhone” feature. Navigate to “Settings” > “iCloud” > “Find My iPhone” and toggle the switch off to turn off the feature.

Step 2: Now, go back to the “Settings” window and click “iTunes & App Store”.

Step 3: Tap on your “Account” at the top. A pop-up will appear on your screen. Here, click “Sign Out” and the iCloud account will be removed from your iDevice.

1.3 Create a new password

If you have enabled two-way verification on your Apple iPhone SE (2020), you can also delete the iCloud account by resetting the password. In this case, however, you’ll have to visit the Apple ID Account Page and use it to reset the password.

Here’s how to delete iCloud account without password by creating a new password.

Step 1: Visit the Apple ID Account page and select “Forgot Apple ID or Password”.

Step 2: Now, enter your Apple ID and tap “Continue”. Select “I Need to Reset My Password” to initiate the password resetting process.

Step 3: You’ll be prompted to a new window where you’ll have to enter the “Recover Key”. This key is an exclusive that’s generated when a user enables two-way verification for their iCloud account.

Step 4: Enter the recovery key and tap “Continue”. Now, select a trusted device where you want to receive the verification code. Enter this verification code to continue with the process.

Step 5: In the next window, you can reset the password. Simply, add the new password and click the “Reset Password” button.

Once the password is changed, you can easily delete your iCloud account by going to “Settings” > “iCloud” > “Delete Account”. Enter the new password and your iCloud account will be deleted permanently.

In case you haven’t enabled two-way verification for your iCloud account, there’s still a way to reset the password. However, you must remember the security questions that you answered or the recovery e-mail you had added while setting up your iCloud account.

Step 1: Open the Apple ID Account page and tap “Forgot Apple ID or Password”. Enter your Apple ID and select “I need to reset my password”.

Step 2: You’ll be redirected to a new window displaying two different methods, i.e., “Answer Security Questions” an “Get an Email.” Choose a suitable method and follow the further steps to reset your password.

Part 2: How to delete iCloud account without password on computer using Dr.Fone - Screen Unlock (iOS)?

If you find all the above methods slightly challenging, we have a simpler solution for you. Wondershare Dr.Fone Screen Unlock (iOS) is an exclusive tool for iOS users that’ll help them remove screen locks and delete iCloud accounts from an iDevice, even if you don’t remember the password or even if the “Find My iPhone” feature is enabled.

Thanks to its user-friendly interface, it’ll become a hassle-free task to delete the iCloud account using Dr.Fone Screen Unlock. Since the software is available for Windows as well as Mac, one can easily use it to bypass Apple ID sign-in, irrespective of the OS one’s using on their PC.

So, let’s quickly discuss how to delete iCloud account without password using Dr.Fone Screen Unlock.

Note: Before moving further, make sure to back up the entire data as this will erase everything from your Apple iPhone SE (2020).

Step 1: Launch Dr.Fone Screen Unlock

Install Dr.Fone Screen Unlock on your PC and double-tap its icon to launch the software. Now, connect your iDevice to the computer using a USB cable.

Step 2: Select Screen Unlock

Now, in the main interface of Dr. Fone Screen Unlock, select “Screen Unlock”.

Step 3: Choose the Option

In the next window, you’ll see three different options. Select “Remove Apple ID” as we want to delete the iCloud account.

Step 4: Trust the Apple iPhone SE (2020) device

Now, to successfully establish the connection between the two devices, enter the passcode on your iDevice and tap the “Trust” button to confirm the connection.

Step 5: Reset Your Apple iPhone SE (2020)

Once the two devices are successfully connected, tap “Unlock Now” on your computer screen. This will trigger a warning message. Click “Unlock” to continue with the process.

At this point, you’ll be asked to enter recovery mode. You can follow the on-screen instructions to successfully enter recovery mode.

Step 6: Unlock Apple ID

After entering the recovery mode, Dr.Fone will automatically initiate the unlocking process. Do not disconnect the iDevice from your computer as this can cause damage to the Apple iPhone SE (2020) device itself.

As soon as your Apple ID gets unlocked, a confirmation message will pop up on your screen. Simply reboot your smartphone and you’ll be able to sign in with a new Apple ID without any hassle.

It doesn’t matter if you’re using Windows or Mac, Dr.Fone – Screen Unlock for iOS will make it extremely easy to delete the iCloud account without the password. So, if you are looking for a reliable and convenient way to remove an iCloud account, make sure to use Dr.Fone – Screen Unlock.

Conclusion

That’s the entire guide on how to delete iCloud account without password. Even though iCloud is an exceptional feature, one is likely to forget the password to his iCloud account. If you’re stuck in a similar situation and want to create a new iCloud account, make sure to use the above tactics to delete the previous iCloud account, even if you don’t remember the password.